Dual connection wireless LAN relay machine where toilet and bath smartphone

Starting from a studio, moving to a 2DK apartment, and upgrading the house to a two -story house, the wireless LAN radio wave is relatively weak each time, and the house is wide.I was suffering from the phenomenon that it would have become comfortable, but it would be inconvenient to change the net.This may be an imbalance of "Wi-Fi life balance", which is not a so-called "work-life balance".

This problem is that my home is unstable by being blocked by obstacles such as walls or simply distant from the wireless LAN router, causing radio waves to attenuate and slow communication speeds.By building, it was mainly appeared mainly during Toys Maho and bath smartphones.In this situation, it can hinder a healthy online life!So, I introduced the latest wireless LAN relay machine for solution.The product is Buffalo's "WEX-733DHP".

Wireless LAN relay machines have already been released by many manufacturers, but the feature of "WEX-733DHP" is IEEE 802..It is compatible with 11ac, and high -speed communication with a maximum theoretical 433Mbps is possible.Also, 2.You can connect simultaneously with a 4GHz band and a 5GHz band dual band.The latter dual band connection is the best key.

For example, 2.In the case of a relay machine that supports only the 4GHz band, the bandwidth will be used half by one between the wireless LAN router, the relay machine, the relay machine and the terminal (PC, smartphone, etc.), and the transfer speed is substantial.Is reduced by half.However, if it is a dual band connection, the wireless LAN router and the relay machine are 2.In the 4GHz band, the relay machine and the terminal are communicated in a 5GHz band, such as in a 5GHz band, so the transfer speed can be used up to the upper limit of each band.

Speed is important, but the most important thing is whether radio waves reach every corner of the house and can access the Internet stably.In my home, a wireless LAN router is placed around the center of the building on the second floor, and it is difficult to reach the first floor, probably because it is installed near the ceiling.Toilets and baths where you can enjoy private relaxing time are particularly unstable, and you can open the toilet door and add as much as possible, but it is very unpopular with your family.

In such a case, once you put the WEX-733DHP to the outlet near the wireless LAN router, click the WPS button, press the WPS button of the wireless LAN router for a few minutes.Since the connection settings were completed immediately, it was attached to the outlet of a relay aircraft that was provided on the first floor when building a house assuming such a situation.In this state, I checked how much the radio wave condition would be improved compared to when there was no relay machine.

The wireless LAN radio wave check application for MacOS X was used.With a wooden two -story loft, only a wireless LAN router is used and when the relay aircraft is introduced in various places in the house with less than 40 square meters per floor..The strength of the radio waves in the 4GHz band and the 5GHz band is summarized.

After the introduction of a relay machine, the radio wave condition on the first floor has been greatly improved.For the second floor and loft, it is a level that can be covered with one wireless LAN router, but the first floor is the impression that it will finally be a practical level by installing a relay machine.In the toilet, the 5GHz band, which is used daily, improves, and can communicate almost stably even with the door closed.You shouldn't bother your family anymore.

The radio wave strength in the bath is 2.Overwhelmingly improved in the 4GHz band.The 5GHz band remains somewhat unstable, but 2.As long as you use it in the 4GHz band, it is comfortable.Since SSID is the same as a wireless LAN router and a relay machine, it is not clear which one is actually connected, but in reality it is definitely easier to connect anywhere in the house after introducing the relay machine.There is a wireless LAN printer multifunction machine in the Japanese room on the first floor, and I want to train while watching music and videos with a cycle trainer in the entrance clay, and I can't think of a life without a relay machine anymore.

By the way, as described in the instructions of this product, the recommended settings are between the wireless LAN router and the relay machine 2..At 4GHz, connect the relay machine and the terminal in the 5GHz band.In this way, the wireless LAN router and the relay machine communicate as much as possible, and the terminal communicates with the relay machine in the high -speed 5GHz band.Of course, the appropriate settings vary depending on the environment and terminal specifications, but in any case, the relay machine should be able to balance the "Wi-Fi life balance" in a good feeling.